Concrete Coatings & Restoration
Sikadur®-22 Lo-Mod FS is a two-component, 100% solids, moisture-tolerant, fast setting epoxy resin binder. It conforms to the current ASTM C881 and AASHTO M 235 specifications.
15,14 L – Communicate with Sika Canada for other packaging solutions available.
Two-Component, Fast Curing, Solvent Free, Elastomeric and Crack-Bridging, Polyurethane Waterproofing Membrane
Use as part of the Sikafloor® Industrial and Decorative Flooring Systems and Sikafloor® Resoclad MRW Type II & III Systems to provide a tough, crack-bridging, watertight membrane prior to overcoating with other flooring products. Typical uses include:
Brown
18 L (4.76 US gal.) pail
Two-Component, Solvent-Free, Low Odour, Elastomeric and Crack-Bridging, Polyurethane Binder and Wear Course in SA version
Use as an interior wear course over Sikalastic® Duochem 390 Membrane to provide a durable, anti-skid surface. Typical uses include:
■ Multi-storey parking garages.
■ Parking decks and ramps.
■ Foot bridges and walkways.
■ Stadiums and arenas.
■ Plaza and rooftop decks.
■ Balconies and terraces.
Use as part of the Sikafloor® Resoclad MRW Type III System to provide a tough, crackbridging, watertight wear course. Typical uses include:
■ Mechanical rooms.
■ Stadiums and arenas.
■ Shower rooms.
■ Loading docks.
■ Laboratories or areas of high spillage.
■ Economical and easy to apply.
■ High abrasion resistance
■ Solvent free and low odour
■ Easy to clean and maintain
■ Forms hard, yet flexible film
■ Pre-measured packaging.
■ Potential LEED® credit:
– Low Emitting Material – Paints and coatings
– Contains 51% (reg) and 44% (SA) of rapidly renewable material (non food vegetable oil).
■ SA version contains 24% of post consumer rubber.
RAL 7046 Telegrey 2, RAL 7012 Basalt Grey, RAL 7015 Slate Grey and RAL 9017 Traffic Black.
Special colours available on request.
18 L (4.76 US gal.) unit
Low Modulus, High Strength, Moisture-Insensitive, Modified Epoxy Resin for Skid-Resistant Concrete verlays and Patching Mortars
■ Recommended as a wear course for high traffic areas such as ramps and turning points in parking decks.
■ May also be used as a wear course for the Sikalastic® system for heavy use locations.
■ Multi-purpose binder may be used to produce heavy-duty patching mortars.
■ As a waterproof, skid and wear resistant overlay for critical, high demand logistics floors.
■ Convenient, easy mix ratio A:B = 1:1 by volume.
■ Economical and easy to apply system.
■ Lighter than concrete overlays so reduces dead load on suspended slabs.
■ Excellent abrasion and wear resistance.
■ Excellent bond strength to properly prepared substrates.
■ Low modulus of elasticity, tolerating thermal movement of the substrate.
■ Resistant to chlorides, oil, gasoline and other chemicals.
■ Canadian Food Inspection Agency acceptance.
■ Meets LEED® requirements.
RAL 7012 Basalt Grey, RAL 7015 Slate Grey, RAL 7046 Telegrey 2 and RAL 9017 Traffic Black
Special colours available on request.
7.56 L and 37.8 L (2 and 10 US gal.) units
Water-Based, Easy to Clean, Epoxy Coating with Wear and Mild Chemical Resistance for Floors, Walls and Ceilings
■ As a interior coating for surfaces in
chemical, pharmaceutical and food processing and preparation facilities,
warehouses and workshops which require coating whilst normal operations
continue.
■ Use on floors, walls, ceilings and machinery where a
semi-gloss, wear resistant finish is needed, which will withstand
contact with mildly corrosive chemicals and scrubbing during wash- down.
■ As a thin -film, vapour permeable sealer on concrete above, on, or below grade.
■ Water-based, ideal for interior application without disruption to ongoing operations.
■ Able to withstand light or moderate traffic (i.e. pedestrians and pneumatic tires).
■ Good resistance against mild corrosive chemicals, wear factors and scrubbing while being cleaned.
■ Permeable to water vapour – suitable for application for above-, on- and belowgrade.
■ Canadian Food Inspection Agency (CFIA) acceptance.
■ Potential for LEED® Canada credit (Low-Emitting Materials – Paints and Coatings).
Colour RAL 7012 Basalt Grey, RAL 7046 Telegrey 2
Special colours available on request.
3.78 L (1 US gal.) and 18.9 L (5 US gal.) units
High-Solids, Low-VOC, Flexible and Crack-Bridging, Waterproof Epoxy Membrane or Coating
Clear and other colours available with use of Sikafloor® Epoxy Color Additive. (Refer to Sikafloor Epoxy Color Additive Color Selection Guide)
37.8 L (10 US gal.) unit, consisting of 2 x 18.9 L(5 US gal.) pails.
Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]
