Textured Floor Coatings

Sikafloor®-261 CA Thixo

Thixo Coating (Orange Peel Texture) (20 – 24 mils)

Use

■ Wet and dry process areas.
■ Commercial and institutional buildings.
■ Health care facilities.
■ Laboratories.
■ Moderate mechanical and chemical resistance areas.
■ Recreational centers.
■ Showroom areas.

Characteristics and Advantages

■ Moderate mechanical and chemical resistance.
■ Aesthetic textured finish.
■ Hides surface imperfections.
■ Durable, impermeable and seamless.
■ Easily cleaned, maintained and a more sanitary work environment.
■ Does not support growth of bacteria or fungus.
■ Neutral odour.
■ Unlimited colours, no minimum required.
■ Achieves high performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade).
■ Canadian Food Inspection Agency acceptance/USDA acceptance.

Colour

Refer to the Industrial Flooring and Coatings colour card.
RAL 7038 Agate Grey RAL 5007 Brilliant Blue
RAL 7030 Stone Grey RAL 6028 Pine Green
RAL 1001 Beige RAL 7012 Basalt Grey
RAL 1018 Zinc Yellow RAL 9003 Signal White
RAL 3010 Brick
Custom colours available upon request. Refer to current price list for availability.

Packaging

10 L (2.6 US gal.) unit
(Sikafloor® 261CA Thixo Coating consists of a special component B)

Sikafloor® Duochem-5206

High-Solids and Wear-Resistant, Clear, Satin Finish Epoxy Coating for Anti-Slip Floors

Use

■ Use as a seal/top coat on decorative surfaces to maintain original appearance and aesthetics.
■ Suitable for grocery and department stores, food packing rooms, factories, pharmaceutical laboratories and offices, hospitals, museums, galleries, banks and government buildings.

Characteristics and Advantages

■ Easy to apply, high-solids with low odour.
■ Convenient 2:1 mixing ratio.
■ Liquid applied, seamless surface sealer.
■ Satin finish with improved slip-resistance.
■ Wear-and chemical resistance.
■ CFIA acceptance.
■ Low VOC content, LEED^® Canada credit potential.
■ Protects finishes and colours of adequate substrate.
■ Easy to clean and maintain.

Colour

Clear/Textured, satin finish

Packaging

11.34 L (3 US gal.) and 56.7 L (15 US gal.) units

Sikafloor® Duochem-6

Sikafloor® Duochem 6 is a polypropylene base texturing and gloss reduction additive that is easily dispersed during the mixing process into selected Sikafloor® and Sikagard® coatings. The inert micronized polymer powder, functions as an aggregate to produce a fine surface texture that decreases gloss and increases the relative coefficient of friction to provide a greater degree of slip resistance.

Use

As an additive in Sikafloor® and Sikagard® clear and coloured coatings to increase the relative coefficient of friction to provide a greater degree of slip resistance.
To reduce the reflective gloss level of Sikafloor® and Sikagard® clear and coloured coatings.
To replace silica aggregate used to create texture, suitable for light duty traffic areas.
To produces a fine texture that has a smoother feel under foot traffic than hard sand aggregates.

Characteristics and Advantages

Low specific gravity reduces bottom settling making it easy to mix and apply.
No effect on pot life or cure rate.
Contains no crystalline silica.
Insoluble at room temperature to common solvents and thinners.
High wear resistance to regular foot traffic and infrequent lightweight, rubber wheeled carts.
Spherical shaped particles produce a fine surface texture that is easy to clean and maintain.

Colour

White powder

Packaging

488 g (1.08 lb) bottle

Sika® Extender T

Thickening Agent for Epoxy Resin Systems

Use

In combination with: Sikafloor 156^CA, Sikafloor 261^CA, Sikafloor 381, Fastflor CR, Sikagard 62^CA and other Sika epoxy systems.
For applications on horizontal surfaces to create custom orange peel textures.
For applications on vertical surface to hold the resin in place during cure.
To create a thin set, fine texture, crack filler and patching gel.

Characteristics and Advantages

Allows for viscosity adjustment during Sikafloor resin applications to suit site conditions.
Economical, easy to mix and use.
No effect on pot life or cure rate.
Low addition rate to change viscosity when compared to other epoxy thickening agents
Non-carcinogenic.
Inert non-reactive filler.

Packaging

1.0 kg (2.2 lb) packaged in a 20 L (5 US gal.) plastic pail
Note: Sika measuring cup enclosed in each pail / each cup holds approx 18 g (0.63 oz) Approx. 55 Sika measuring cups are weighed-out from each 1 kg (2.2 lb) pail.

Sikafloor®-217 Thixo Lite

Sikafloor®-217 Thixo Lite is a 100 % solids, low VOC, low odour, water clear, high gloss, thixotropic epoxy used to create premium quality, high build, light ‘orange peel’ texture on coatings, broadcast or trowel-applied surfacing systems such as Sikafloor® Quartzite®, DecoFlake® and Metallic FX® Systems. Sikafloor®-217 Thixo Lite formulation contains state of the art raw materials and additives blended to create an aesthetic, clear epoxy that has the highest possible resistance to ultra violet light colour change over time. It is specifically designed to have improved sag resistance when used as a grout and top coat on vertical applications.

Use

Sikafloor®-217 Thixo Lite provides an additionnal measure of long term colour stability in traditional seamless flooring installations that include:

Laboratories, life sciences, pharmaceutical industries and health care industry.
Education (e.g. schools and universities).
Leisure & culture (e.g. museums, stadiums).
Retail spaces (grocery, department and retail stores).
Bank, offices and government buildings.
Animal shelters and veterinary clinics.
Bathroom and shower areas.

Characteristics and Advantages

Superior resistance to long term UV light colour change.
100 % solids as supplied.
Low VOC content, low odour.
Superior aesthetic, glossy, light ‘orange peel’ finish.
Durable, impermeable and seamless surface that is easy to clean.
Excellent impact resistance.
Meets the requirements of CFIA and USDA for use in food plants.

Colour

Clear

Packaging

Component A: 11.35 L (3 US gal.) Resin
Component B: 5.7 L (1.5 US gal.) Hardener
Components A+B: 17.05 L (4.5 US gal.)

Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]

West Pacific Coatings