ESD Control Flooring Systems

Sikafloor®-222 W ESD

Sikafloor^® -222W ESD is a two-component, water-based epoxy conductive primer with high electrostatic conductivity. It is designed specifically for use in combination with Sikafloor^® -260 ESD and Sikafloor^® -270 ESD electrostatic conductive coating systems. Sikafloor^® -222W ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor^® -156^CA , Sikafloor^® -1610 or Sikafloor^® -261^CA .

Use

Sikafloor®-222W ESD is an intermediate conductive primer coat used in combination with Sikafloor®-250 ESD,
Sikafloor®-260 ESD and Sikafloor®-270 ESD coating systems that are designed to impart electrostatic control properties
to a variety of substrates in conjunction with ESD footwear. Industries currently using these coatings are:

Electronics
Data processing
Military/Aerospace
Photographic, graphic arts
Hazardous industries (dust or explosion hazards)

Characteristics and Advantages

Consistent resistance measurements are obtained when testing in accordance with standard methods
Provides a highly conductive ground plane
Water-based, solvent-free, very low VOC content
Low odour formulation suitable for application in occupied facilities
Meets the requirements of CFIA and USDA for use in food plants

Colour

Available in 8 standard colours (Refer to Sikafloor ESD Colour Chart)

Packaging

Component A: 1.02 L (0.27 US gal.)
Component B: 4.66 L (1.23 US gal.)
Components A+B: 5.68 L (1.50 US gal.) Ready to mix unit.

Sikafloor®-260 ESD

Sikafloor®-260 ESD is a two-component, general service, low VOC, solid colour epoxy coating system designed to impart electrostatic control properties to a variety of substrates in conjunction with ESD footwear. Sikafloor®-260 ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor®-156CA, Sikafloor®-1610 or Sikafloor®-261CA.

Use

Sikafloor®-260 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using these coatings are:

Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazardous industries (dust or explosion hazards)

Characteristics and Advantages

Consistent resistance measurements are obtained when testing in accordance with standard methods.
Very low body voltage generation values possible when wearing heel straps C or SD footwear.
Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
Available in conductive range (2.5 X 104 to 1.0 X 106) ohms per ANSI/ESD S7.1/ASTM F-150.
Maintains electrical conductivity throughout the entire thickness of the system.
Does not depend on relative humidity for conductive properties.
Tough, smooth, non-porous surface is easy to clean and maintain.
Low odour formulation suitable for application in occupied facilities.
VOC compliant.
Meets the requirements of CFIA and USDA for use in food plants.

Packaging

Component A: 10.4 L (2.75 US gal.) / packaged in one 18.9 L (5 US gal.) pail
Component B: 5.7 L (1.50 US gal.) / packaged in one 7.6 L (2 US gal.) pail
Components A+B: 16.1 L (4.25 US gal.) Ready to mix unit.

Sikafloor®-270 ESD

Sikafloor®-270 ESD is a two-component, novolac epoxy coating system designed to impart high chemical resistance and electrostatic control properties to a variety of substrates in conjunction with ESD footwear. Sikafloor®-270 ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor®-156CA, Sikafloor®-1610 or Sikafloor®-261CA.

Use

Sikafloor®-270 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD)
cannot be tolerated and the enhanced corrosion resistance properties of a novolac epoxy resin system are desired.

Industries currently using these coatings are:
Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazardous industries (dust or explosion hazards)

Characteristics and Advantages

Consistent resistance measurements are obtained when testing in accordance with standard methods.
Very low body voltage generation values possible when wearing heel straps C or SD footwear.
Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
Available in conductive range (2.5 X 104 to 1.0 X 106) ohms per ANSI/ESD S7.1/ASTM F-150.
Maintains electrical conductivity throughout the entire thickness of the system.
Does not depend on relative humidity for conductive properties.
Tough, smooth, non-porous surface is easy to clean and maintain.
Excellent corrosion resistance especially against inorganic acids.
Low odour formulation suitable for application in occupied facilities.
VOC compliant.
Meets the requirements of CFIA and USDA for use in food plants.

Packaging

Component A: 11.3L (3.0 US gal.) / packaged in 18.9 L (5 US gal.) pail
Component B: 5.7L (1.50 US gal.) / packaged in 7.6 L (2 US gal.) pail
Components A+B: 17.0L (4.50 US gal.) Ready to mix unit.

Please contact West Pacific Coatings for more information regarding any of the SIKA products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]

West Pacific Coatings