Epoxies

New Products

All Flooring and Wall Systems

With so many different flooring and wall systems out there for commercial and industrial applications, it can be difficult to know which will be best for a given project. At Tennant Coatings, is proud to offer a wide range of the best fluid-applied concrete floor and wall coatings available today, and our experts are on hand to discuss your particular needs and which systems may be best able to meet them.

Epoxy and urethane flooring systems, cementitious urethane and epoxy mortar systems, polyaspartic urethane systems methylmethacrylate (MMA) systems and wall systems are available and can be tailored specifically for your facility!

The Functional Demands of the Space

Selecting the best flooring system for a given project will depend heavily on the conditions to which the area will be exposed. A retail area that only experiences foot traffic, for example, will have needs much different from those of an airplane hangar or food processing facility. Even within a single facility, different areas may have different flooring needs that could be best addressed through different systems. When selecting the best floor coating for the job, consider which of these conditions are most likely to be present:

Storage and/or movement of heavy equipment

Exposure to caustic chemical compounds

Traffic by vehicles such as forklifts or wheeled carts

Risk of abrasion or puncture

Extreme fluctuating temperatures

High levels of moisture

The flooring system selected will need to be sufficiently durable and have the qualities necessary to withstand the conditions where it is installed.

Safety Considerations for Concrete Floor Systems

Investing in a sufficiently durable flooring system for a given setting is itself a matter of safety. Damaged flooring systems create uneven surfaces that can increase the risk of a fall, and can also inhibit clear visibility, as small mechanical parts can be much more difficult to find on a dark, pitted and scratched surface. Some settings may require safety features beyond durability and strength, which is why we offer flooring systems that are designed to:

Inhibit the growth of pathogens. This is especially important in healthcare settings and food processing facilities, where the spread of bacteria and other microbes could have far-reaching consequences.

Help minimize the risk of slip and falls. In heavily trafficked areas, helping minimize the risk of a slip and fall incidents by adding texture or additional grit to a system.

Dissipate any buildup of static electricity. In facilities that process delicate electronic instruments, such as avionics and medical equipment, something as simple as a minor electric shock can cause irreversible damage. Protect precision instruments with flooring that prevents the buildup of a static charge.

Tennant Coatings: Beauty and Function in All Concrete Floor and Wall Systems

When you trust Tennant Coatings with your commercial and industrial floor and wall coating needs, there’s no need to sacrifice either functionality or aesthetic appeal — you can have both. Choose from our high-performance flooring systems, and then Solid color flooring and wall coatings can be very attractive and make a statement about your facility, while still attaining chemical resistance, light stability or the slip resistant properties that you need. Nevertheless, adding decorative elements like flake, quartz, chips, colorants, metallic powders, or even a multicolored pattern or logo embedded directly into the floor, can provide an even more striking appearance.

ChemXP™-Nov

A three-coat system, used to protect against caustic and highly acidic chemicals, with a silica sand broadcast for added slip resistance and durability, topcoated with ChemXP-Nov.

Please contact West Pacific Coatings for more information regarding any of the Tennant products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]

ChemXP™-Nov Flake

A three-coat system, consisting of ChemXP-Nov Primer and two coats of ChemXP-Nov Flake, combining excellent protection against acid and caustic chemicals, with an inert flake filling for increased durability and strength.

hemXP™-NovVE

A three-coat broadcast system, using ChemXP-VE Primer as the prime coat, ChemXp-NovVE – novolac vinyl ester resin – with a sand broadcast as the seed coat and topcoat of ChemXP-NovVE for excellent resistance towards solvents and organic and inorganic acids

ChemXP™-NovVE Flake

A three-coat system, designed to hold up to aggressive acids, alkalis, and organic chemicals, using ChemXP-VE Primer as the prime coat with two coats of Tennant’s novolac vinyl ester, ChemXP-NovVE Flake.

ChemXP™-NovVE Flake

ChemXP™-VE

A versatile, three-coat system, using ChemXP-VE Primer as the prime coat, a seed coat of ChemXP-VE with a silica sand broadcast, followed by a topcoat of ChemXP-VE to achieve excellent resistance to alkalis and acids.

ChemXP™-VE Flake

A three-coat vinyl ester resin system, applying a primer of ChemXP-VE Primer and two coats of ChemXP-VE Flake with an inert flake filled vinyl ester, for increased durability and high resistance against alkalis and acids.

Cream Polish

Tennant’s Cream polishing system offers an attractive, smooth, uniform appearance, with little to no exposed aggregate. This is achieved by removing very little to none of the concrete cream surface with a very light grind and polish.

CRU

An economical, nominal 25 mil system, using Eco- MPE™ as the epoxy primer and build coat and Tennant CRU as the light stable and chemical resistant topcoat with a gloss finish

25 Mil CRU (Gloss) Visual Guide-min

Key Features of the CRU System

Light stable/ aliphatic over the expected life of the coating
Chemical resistance
High gloss finish increases brightness and light reflectivity

Eco-CRETE™ HF

A three-part, nominal 1/4” cementitious-polyurethane troweled system for resurfacing interior concrete floors in areas that require thermal shock resistance

Eco-Crete-HF Visual Guide-min

Key Features of Eco-CRETE ™ HF

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Utilizes renewable bean oils and environmentally friendly packaging
Extreme thermal stability – Steam cleanable and formulated to withstand temperature variations up to 250⁰F (121⁰C)
Seamless – Hygienic finish, no grout joints

Eco-CRETE™ SF

A three-part, nominal 1/4″ cementitious-polyurethane slurry system with aggregate broadcast, for resurfacing interior concrete floors in areas that require thermal shock resistance and slip resistance

Eco-Crete-SF Visual Guide-min

Key Features of Eco-CRETE ™ SF

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Utilizes renewable bean oils and environmentally friendly packaging
Extreme thermal stability – Steam cleanable
Seamless – Hygienic finish, no grout joints

Eco-CRETE™ SL

A three-part, nominal 3/16” cementitious-polyurethane slurry system with aggregate broadcast, for resurfacing lightly eroded interior concrete floors in areas that require thermal shock resistance and slip resistance

Eco-Crete-SL Visual Guide-min

Key Features of Eco-CRETE™ SL

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Utilizes renewable bean oils and environmentally friendly packaging
Extreme thermal stability – Steam cleanable
Seamless – Hygienic finish, no grout joints

Eco-ECE™

Tennant’s Eco-ECE 30 mil system is a conductive epoxy system, which uses Eco-MPE™ as the prime coat and build coat and Eco-ECE as the conductive topcoat in a gloss finish

Eco-Flex Deck Visual Guide-min

Eco-Flex™ Deck

A three coat, durable aliphatic parking deck solution to effectively repair eroded or sloped areas, provide slip-resistant texture to help prevent accidents in wet conditions while withstanding extreme temperature, chemical exposure and vehicular traffic

Key Features of Eco-Flex™ Deck System

Seamless for waterproofing applications
Can be used for repairs and sloping
Thermal shock and chemical resistant for durability and protection in extreme environments
Fast cure time
Light stable
Used in underground and aboveground parking garages and decks

Eco-SCT™

A nominal 35 mil, static dissipative system which includes an epoxy primer and an epoxy topcoat with a conductive powder and a gloss appearance

Key Features of Eco-SCT™

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Electrostatic discharge control – Meets ANSI/ESD S20.20-2014 for resistance <1×10⁹ and <100 volts Body Voltage Generation

Eco-SDS™ Satin

A nominal 25 mil static dissipative system with an epoxy primer and light stable urethane topcoat with a satin finish for long-lasting durability

25 Mil SDS (Satin) Visual Guide-min

Key Features of Eco-SDS™ Satin

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Electrostatic discharge control – Meets ANSI/ESDs20.20-2007 for resistance <1×10⁹ and <100 volts Body Voltage Generation

Eco-ShopFloor™

A four-coat, nomial 1/16” system, used to help withstand the high demands of a hard working facility, with a silica sand broadcast for added texture and durability, topcoated with Eco-HTS™ 100 for chemical resistance and its aliphatic properties.

Key Features of Eco-ShopFloor™ System

LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
Added slip resistance and durability that withstands high-volume, heavy-wheeled traffic
Light stable/ aliphatic over the expected life of the system
Satin sheen maintains a fresh look

Epoxy Flake SR-HTS

A nominal 1/8” double broadcast decorative flake system, with an epoxy seal coat and a urethane topcoat, creating an economical, durable and beautiful UV-resistant system with added texture for more slip resistance and a satin finish

1-8 Epoxy Flake SR-HTS Visual Guide-min

Key Features of the Epoxy Flake SR-HTS System

This system uses Eco-URE™ as an epoxy seal coat and Eco-HTS™ 100 as a urethane topcoat for a satin finish with UV-resistance, slip resistance and durability that withstands high-volume, heavy-wheeled traffic
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Epoxy Quartz SR-HTS

A nominal 1/8” double broadcast decorative quartz system, with an epoxy seal coat and a urethane topcoat, creating an economical, durable and beautiful UV-resistant system with added texture for more slip resistance and a satin finish

1-8 Epoxy Quartz SR-HTS Visual Guide-min

Key Features of the Epoxy Quartz SR-HTS System

This system uses Eco-URE™, an epoxy seal coat and Eco-HTS™ 100 as a urethane topcoat for a satin finish floor with UV-resistance, slip resistance and durability that withstands high-volume heavy wheeled traffic
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Flake

A nominal 1/8” double broadcast decorative flake system, with a polyaspartic seal coat and topcoat, creating a durable and beautiful UV-Stable system for with smoother texture and a gloss finish

1-8 Flake Visual Guide-min

Key Features of the Flake System

This system uses Eco-TCP™, a polyaspartic urethane, as both the seal coat and topcoat for a gloss finish with light stability and quick dry time
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Flake SR-HTS

A nominal 1/8” double broadcast decorative flake system, with a polyaspartic seal coat and a urethane topcoat, creating a durable and beautiful UV-stable system with added texture for more slip resistance and a satin finish

1-8 Flake SR-HTS Visual Guide-min

Key Features of the Flake SR-HTS System

This system uses Eco-TCP™ as a polyaspartic urethane seal coat and Eco-HTS™ 100 as a urethane topcoat for a satin finish with light stability, slip resistance and durability that withstands high-volume, heavy-wheeled traffic
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Glaze Wall

Help reduce maintenance costs with a durable and easy to clean wall, using a three coat UV-resistant epoxy system with an orange peel finish

Wall Glaze Visual Guide-min

Key Features of the Glaze Wall System

LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
Epoxy-Based system, providing long-lasting durability Uses:
- Commercial restrooms
- Commercial/industrial kitchens
- Hospitals
- Food Processing Areas
- Locker rooms/Shower areas
- Pharmaceutical/Biomedical Facilities
- Transpiration Facilities
- Laboratories
- Schools

HD-CRU

An economical, nominal 1/4” epoxy mortar system used to resurface eroded interior concrete floors with a UV-stable urethane topcoat with a gloss finish

1-4 CRU Visual Guide-min

Key Features of the HD-CRU System

This system uses Eco-PT 250™ as the resurfacer and Tennant CRU as the urethane topcoat, for a gloss finish with both UV and high chemical resistance
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
High gloss finish increases brightness and light reflectivity

HD-HPS

A nominal 1/4” epoxy mortar system used to resurface eroded interior concrete floors with a UV-stable urethane topcoat with a gloss finish

1-4 HPS Visual Guide-min

Key Features of the HD-HPS System

This system uses Eco-PT 250™ as the resurfacer and Eco-HPS™ 100 as the urethane topcoat, for a gloss finish with both UV and high chemical resistance
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
High gloss finish increases brightness and light reflectivity

HD-HTS

A nominal 1/4” epoxy mortar system used to resurface eroded interior concrete floors with a UV-stable urethane topcoat with a satin finish for long-lasting durability

1-4 HTS Visual Guide-min

Key Features of the HD-HTS System

This system uses Eco-PT 250™ as the resurfacer and Eco-HTS™ 100 as a urethane topcoat, for a satin finish floor with UV-resistance, slip resistance and durability that withstands high-volume heavy wheeled traffic
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coating
Low odor/Low VOC

HPS

A nominal 25 mil system, using Eco- MPE™ as the epoxy primer and build coat and Eco-HPS® 100 as the light stable and chemical resistant topcoat with a gloss finish

25-Mil HPS (Gloss) Visual Guide-min

Key Features of the HPS System

LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
Light stable/ aliphatic over the expected life of the coating
High gloss finish increases brightness and light reflectivity

HTS

A nominal 25 mil system, using Eco- MPE™ as the epoxy primer and build coat and Eco-HTS™ 100 as the durable, light stable and chemical resistant topcoat with a satin finish

25 Mil HTS (Satin) Visual Guide-min

Key Features of the HTS System

LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC
Slip resistance and durability that withstands high-volume, heavy-wheeled traffic
Light stable/ aliphatic over the expected life of the coating
Satin sheen maintains a fresh look

Large Aggregate Exposure Polish

Tennant’s Large Aggregate Exposure polishing system, offers an exposed granite look, created by removing a maximum of ¼” (6.35 mm) of the concrete surface. This is achieved by using aggressive grinding and polishing to reveal the large, coarse aggregate of the concrete substrate.

Application

Step 1:
- Apply ReVue™-HydroCut Concrete Cutting Compound and Grind with 16 Grit Metal

Step 2:
- Grind Wet with ReVue™-SP100 Sintered Press Metal Tools

Step 3:
- Apply ReVue™-HydroDense Concrete Densifier Followed by a Wet Grind with ReVue™-HYB400 Hybrid Semi Metal Tools

Step 4:
- Grind Dry with ReVue™-PHN1500 Phenolic Tools and Apply ReVue™-HydroGard Concrete Sealer

Step 5:
- Burnish with ReVue™-DP3000 Diamond Impregnated Pads

Mat Wall

Help reduce maintenance costs with a durable and easy to clean wall, a four coat UV-resistant epoxy system with a reinforcing fiberglass mesh and an orange peel finish that is both chemical resistant and easy to clean

Wall Fiber Mat Visual Guide-min

Key Features of the Mat Wall System

This system uses Eco-MPE™ as the primer, Eco-PT™ Topcoat imbedded with fiberglass mesh, and Eco-URE™/OP as the Topcoat
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC Uses:
- Commercial/industrial kitchens
- Hospitals
- Food Processing Areas
- Locker Rooms/Shower Areas
- Pharmaceutical/Biomedical Facilities
- Transpiration Facilities
- Laboratories
- Schools

Metallic HPS

A nominal 35mil high-solids, metallic decorative flooring system, with a non-yellowing epoxy, metallic pigments, and a light- stable, chemically resistant urethane topcoat with a gloss finish. This system is meant for interiror concrete floors.

Key Features of the Metallic HPS System

Beautiful decorative look available in a wide variety of color options
Light stable/ aliphatic over the expected life of the coating
Chemical resistance
High gloss finish
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings

Metallic HTS

A nomial 35mil, high-solids, metallic decorative flooring system, with a non-yellowing epoxy, metallic pigments, and a light-stable, chemically resistant urethane topcoat with a satin finish. This system is meant for interior concrete floors.

Key Features of the Metallic HPS System

Beautiful decorative look available in a wide variety of color options
Light stable/ aliphatic over the expected life of the coating
Chemical resistance
Satin finish great for high wear areas and added slip resistance
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings

MMA 1/16″ Slurry

A five coat, nominal 1/6″ semi self-leveling methyl methacrylate (MMA) system with a full quartz or flake broadcast, sealed with two UV-stable MMA topcoats

MMA 1-16 Slurry Visual Guide-min

Key Features of the MMA 1/16” Slurry

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Light stable
Quick dry time – around 1 hour for each coat
Exceptional resistance to acids and alkalis
Excellent flow ability, shows no trowel marks
Superior compressive, tensile and flexural strengths, withstands high levels of abrasion and loading
Installation of system in temperatures as low as -20⁰F (28.9⁰C)

Color Options:

Can use both Stocked and Non-Stocked colorants in this system
Colorant is used with seed coat to provide background color only

MMA Deco – Quartz

A six coat self-leveling methyl methacrylate (MMA) system with a double quartz broadcast, sealed with two UV-stable MMA topcoats

MMA Deco – Quartz Visual Guide-min

Key Features of the MMA Deco-Quartz

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Light stable
Quick dry time – around 1 hour for each coat
Provides excellent chemical resistance

Color Options:

Can use both Stocked and Non-Stocked colorants in this system
Colorant is used with seed coat to provide background color only

MMA Shop

A five coat self-leveling methyl methacrylate (MMA) system with a single quartz broadcast, sealed with two UV-stable MMA topcoats

MMA Shop Visual Guide-min

Key Features of the MMA Shop

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Light stable
Quick dry time – around 1 hour for each coat
Optional double quartz broadcast system available (See system guide and guide specification)

Color Options:

Can use both Stocked and Non-Stocked colorants in this system
Colorant is used with seed coat to provide background color only

MMA Slurry

A five coat, nominal 1/8 inch – 3/16 inch, semi self-leveling methyl methacrylate (MMA) system with a single quartz or flake broadcast, sealed with two UV-stable MMA topcoats

MMA Slurry Visual Guide-min

Key Features of the MMA Slurry

LEED Credit available – LEED Green Building Certification Program credits may be available – Indoor Environmental Quality – 4.2 Low Emitting materials, Paint & Coatings
Light stable
Quick dry time – around 1 hour for each coat
Excellent flow ability, shows no trowel marks • Superior compressive, tensile and flexural strengths, withstands high levels of abrasion and loading
Installation of system in temperatures as low as -20⁰F (28.9⁰C)

Color Options:

Can use both Stocked and Non-Stocked colorants in this system
Colorant is used with seed coat to provide background color only

Quartz

A nominal 1/8” double broadcast quartz system, using a polyaspartic urethane as both the seal coat and the topcoat, creating a durable and beautiful UV-resistant system with light texture and a gloss finish

1-8 Quartz Visual Guide-min

Key Features of the Quartz System

This system uses Eco-TCP™, a polyaspartic urethane, as both the seal coat and topcoat for a gloss finish with light stability and quick dry time
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Quartz HTS

A nominal 1/8” double broadcast decorative quartz system, with two seal coats of a polyaspartic and a urethane topcoat, creating a durable and beautiful UV-Stable system with a light texture and a satin finish

1-8 Quartz HTS Visual Guide-min

Key Features of the Quartz HTS System

This system uses Eco-TCP™, a polyaspartic urethane as two seal coats and Eco-HTS™ 100 as the topcoat
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Quartz SR-HTS

A nominal 1/8” double broadcast decorative quartz system, with one seal coat of a polyaspartic and a urethane topcoat, creating a durable and beautiful UV-Stable system with added texture for more slip resistance and a satin finish

1-8 Quartz SR-HTS Visual Guide-min

Key Features of the Quartz SR-HTS System

This system uses Eco-TCP™, a polyaspartic urethane as a seal coat and Eco-HTS™ 100 as the topcoat for textured satin finish floor with slip resistance
LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings
Low odor/Low VOC

Salt N’ Pepper Polish

Tennant’s Salt N’ Pepper polishing systems creates a beautiful exposed aggregate appearance with the look of natural stone, accomplished by removing a maximum of 1/16” (1.60 mm) of the concrete cream surface with a light grind and polish.

Application

Step 1:
- Use ReVue™-HydroCut cutting compound with ReVue™-SP400 Sintered Press Metal Tools

Step 2:
- Apply ReVue™-HydroDense concrete densifier. Followed by wet grind withnReVue™-HYB400 semi-metal tools

Step 3:
- Use ReVue™-PHN1500 phenolic bonded tools with a final application of ReVue™-HydroGard concrete sealer

Tennant Flex Deck

A durable, four coat, aromatic parking deck solution to effectively repair eroded or sloped areas, provide slip-resistant texture to help prevent accidents in wet conditions while withstanding extreme temperature, chemical exposure and vehicular traffic

Flex Deck Visual Guide-min

Key Features of Flex Deck System

Seamless for waterproofing applications
Can be used for repairs and sloping
Thermal shock and chemical resistant for durability and protection in extreme environments
Fast cure time
Used in underground parking garages and decks

WearGuard-240 Satin

A nominal 25 mil system, using Eco-MPE™ as the epoxy primer and build coat and WearGuard-240 Satin as an economical topcoat with a stain finish

Key Features of the WearGuard-240 Satin System

Extremely durable
Economical
Meets VOC Regulations – Under 250g/L VOC

WearGuard-240 Gloss

A nominal 25 mil system, using Eco-MPE™ as the epoxy primer and build coat and WearGuard-240 Gloss as an economical topcoat with a gloss finish

Key Features of the WearGuard-240 Gloss System

Extremely durable
Economical
Meets VOC Regulations – Under 250g/L VOC

Refrence: TennatCoating Website

Old Products

Eco-MPE™

High-performance, multi-purpose primer ideal for thin-mil systems, broadcast coats or stand-alone coatings

Easy-to-use, self-leveling formula allows for easy application.
Improves floor appearance with a high-quality look and a high-gloss finish.
Low odor formula works perfectly around odor-sensitive stock and environments.

Key features

Apply Eco-MPE as a multi-purpose primer and build coat.
High-gloss finish with smooth texture.
LEED credits available.

Color Options

Choose a clear coating or select from standard and custom colors.
Download Eco-MPE Brochure

Eco-RCE™ / Eco-RCE™ F / Eco-RCE™ M

Excellent primer and build coat that cures fast, even in cool temperatures

Reduces downtime by priming and building floors at 50°-70° F (10°-21° C).
Fills random cracks when combined with thickening agents.

Key features

Requires a topcoat for UV stability.
Two-component, 100 percent solids epoxy.
Applied at 3 mils for priming or up to 30 mils (1/32 inch) as a build coat
LEED credits available.

Color Options

Choose a colored Tennant topcoat to ensure UV stability.

Eco-Flex™

Protect areas prone to cracking

Enhance the appearance of your facility by reducing cracking in areas subject to damage from vibration and floor movement.
Ensure long-lasting results; Eco-Flex continues to flex, bend, and withstand cracking for the life of the coating.
Protect your environment by deadening sound.

Key features

Reduces damage from dropped tools and other heavy objects.
Two 20-mil coats will reduce risk of water damage to areas below.
LEED credits available.

Color options

Choose from standard, clear, or custom colors.
Download Eco-Flex Brochure

Eco-CEP™

Pigmented epoxy primer with excellent hiding properties for white and light gray topcoat applications.

Easy-to-use, self-leveling formula allows for easy application.
Minimizes downtime with its cure-to-recoat time of only 12 hours.
Reduces the number of coats necessary to obtain hide.
Low odor formula works perfectly around odor-sensitive stock and environments.

Key features

Apply as a multi-purpose primer and build coat (3-30 mil).
Greater hide characteristics than standard epoxies.
LEED credits available.

Color options

White. Canada Gray colorant may be added to make light gray.
Download Eco-CEP Brochure

For more Information, please visit our new website
https://www.westpacificcoatings.com/

West Pacific Coatings

Epoxies

All Flooring and Wall Systems

The Functional Demands of the Space

Safety Considerations for Concrete Floor Systems

Tennant Coatings: Beauty and Function in All Concrete Floor and Wall Systems

ChemXP™-Nov

ChemXP™-Nov Flake

hemXP™-NovVE

ChemXP™-NovVE Flake

ChemXP™-VE

ChemXP™-VE Flake

Cream Polish

CRU

Eco-CRETE™ HF

Eco-CRETE™ SF

Eco-CRETE™ SL

Eco-ECE™

Eco-Flex™ Deck

Eco-SCT™

Eco-SDS™ Satin

Eco-ShopFloor™

Epoxy Flake SR-HTS

Epoxy Quartz SR-HTS

Flake

Flake SR-HTS

Glaze Wall

HD-CRU

HD-HPS

HD-HTS

HPS

HTS

Large Aggregate Exposure Polish

Mat Wall

Metallic HPS

Metallic HTS

MMA 1/16″ Slurry

MMA Deco – Quartz

MMA Shop

MMA Slurry

Quartz

Quartz HTS

Quartz SR-HTS

Salt N’ Pepper Polish

Tennant Flex Deck

Wea​rGuard-240 Satin

WearGuard-240 Gloss

Eco-MPE™

Eco-RCE™ / Eco-RCE™ F / Eco-RCE™ M

Eco-Flex™

Eco-CEP™

Quicklinks

Contact Us

How Can We Help?

WearGuard-240 Satin