Concrete Coatings & Restoration
Vertical and Overhead One-Component Repair Mortar
Planitop 12 is a one-component, shrinkage-compensated, cementitious, thixotropic, fiber-reinforced mortar intended for the renovation of interior/exterior vertical and overhead concrete surfaces. Use it for overhead structural concrete repairs and restoration up to a thickness of 2″ (5 cm). Planitop 12 can be placed in large quantities in overhead applications and is suited for precast, cast-in-place, post-tensioned and prestressed concrete repair.
Form-and-Pour, One-Component Repair Mortar
Planitop 15 is a one-component, shrinkage-compensated, cementitious, fiber-reinforced, fluid mortar. It is suited for interior/exterior form-and-pour applications where high early strength and flowability are required. Planitop 15 is used as a material for concrete repair and restoration that can be fluid-applied into a form in thicknesses of 3/8” to 2” (10 mm to 5 cm).
Fast-Setting, Flowable, One-Component Repair Mortar
Planitop 18 is a one-component, shrinkage-compensated, fast-setting, cementitious repair mortar that is suited for all interior/exterior horizontal concrete repairs, including bridge-deck overlays, parking-garage floor repairs and various horizontal DOT concrete repairs.
This product includes High-Hydrated Cement Technology (HCT™).
Thin-Build, Two-Component Rendering MortarPlanitop 21 is a pre-proportioned, two-component, polymer-modified cementitious mortar. It is used for renovating and resurfacing interior/exterior concrete structures such as galleries, tunnels, bridges, overpasses, retaining walls, beams, building facades and ceilings. Planitop 21 also is used for treating concrete surface blemishes and defects; filling honeycombs, voids and cavities; and protecting concrete against pollutants and acid rain.Planitop 21 contains a high concentration of synthetic polymer, which produces a repair mortar having excellent adhesion, flexural strength, compressive strength, water impermeability and freeze/thaw resistance. Apply up to 1/4″ (6 mm) thick.
Vertical and Overhead Two-Component Repair Mortar
Planitop 23 is a pre-proportioned, two-component, polymer-modified, thixotropic, cementitious fiber-reinforced mortar. It is used for renovating and resurfacing interior/exterior concrete structures such as galleries, tunnels, bridges, overpasses, retaining walls, beams, building facades and ceilings. Planitop 23 also is used for treating concrete surface blemishes and defects; filling honeycombs, voids and cavities; and protecting concrete against pollutants and acid rain. With a high concentration of synthetic polymer and fiber, Planitop 23 offers excellent adhesion, flexural strength, compressive strength, water impermeability and freeze/thaw resistance. Once mixed, the mortar applies easily onto vertical, horizontal and overhead ceiling surfaces, in thicknesses of 1/8″ to 2″ (3 mm to 5 cm) per coat.
Two-Component, Flowable Repair Mortar for Resurfacing Damaged Horizontal ConcretePlanitop 25 is a two-component, shrinkage-compensated, cementitious, flowable resurfacing mortar with corrosion inhibitor. Once mixed, the mortar is easily placed onto horizontal surfaces in thicknesses of 1/4″ up to 1″ (6 mm to 2,5 cm) per coat. Planitop 25 contains a high concentration of synthetic polymer, which produces a dense, durable resurfacing mortar with outstanding adhesion, flexural and compressive strengths. Planitop 25 has very low permeability, offering high resistance to freeze/thaw cycles and chloride ion penetration. Formulated for demanding commercial and industrial repairs involving heavy impact and high abrasion, such as loading docks, parking garages, warehouse floors, and areas subject to extreme traffic and dynamic loads.
Fast-Setting Horizontal, Vertical and Overhead One-Component Repair Mortar
Planitop X is a one-component, shrinkage-compensated, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor. It is suited for all interior/exterior vertical, overhead and horizontal concrete applications, including precast/prestressed, tilt-up, post-tensioned and cast-in-place concrete.Planitop X can be applied in thicknesses of featheredge to 4″ (0 to 10 cm) per lift. Planitop X is engineered with MAPEI’s Easy Glide Technology™ for ease of application and is light gray to match existing concrete surfaces.
This product includes High-Hydrated Cement Technology (HCT™).
Extended-Working-Time, Vertical and Overhead One-Part Repair Mortar
Planitop XS is an extended-working-time variation of Planitop X. Shrinkage-compensated, fiber-reinforced and polymer-modified, Planitop XS features Planitop X ’s outstanding workability and corrosion inhibitor. Ideal for use in a wide variety of vertical and overhead concrete repairs, Planitop XS can be applied in thicknesses of featheredge to 4″ (0 to 10 cm) per lift. Planitop XS is engineered with MAPEI’s Easy Glide Technology™ for ease of application and is light gray to match existing concrete surfaces.
Full-Depth Repair Mortar
Planitop FD is a one-part, shrinkage-compensated, cementitious, self-compacting flowable mortar for a variety of structural repairs. Planitop FD contains a corrosion inhibitor and is suited for form-and-pour applications as well as flatwork repairs at depths from 1/2″ to 4″ (12 mm to 10 cm) neat. Planitop FD is pumpable and ideal for deep repairs that require ease of placement and a rapid return to service.
For more information, please visit our new website
https://www.westpacificcoatings.com/
