Tremco Epoxy Primer

Two-Part Epoxy Primer

Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.

Basic Uses

• Tremco Epoxy Primer may be applied to the surface of fully cured TREMproof 250GC, ExoAir 120, ExoAir 220, ExoAir 230, TREMproof 6100 HRA, TREMproof 6145 HRA, Vulkem 350 and 350NF.

TREMprime Multi-Surface Urethane Primer

TREMprime Multi-Surface Urethane Primer is a two-component, quick-drying, epoxy-based, VOC-compliant primer primarily for use with Vulkem® urethane deck coating and liquid-applied waterproofing products. It may also be used with Vulkem and Tremco branded urethane sealants.

Basic Uses

• Porous surfaces, interlaminary, urethane coatings. Low-VOC (<60 g/L), two-part epoxy primer used to condition and prep porous surfaces and existing coatings for application of a new coating layer.
• Apply with a short nap roller or brush evenly to the surface.
• Primer must dry completely before coating application as indicated by turning from milky-white to completely clear.

TREMprime Non-Porous Primer

TREMprime Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.

Basic Uses

• Non-porous surfaces and urethane sealants.
• A low-VOC, waterbased, quick-drying, one-part primer.
• TREMprime Non-Porous Primer is not a film-forming primer.
• It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.
• Apply with a clean cloth.
• Remove all excess primer from cloth to ensure a very thin layer is applied.
• Dry time is 15 min at 70 °F (21˚C).
• Primer must be completely dry before applying sealant or coating.
• Urethane sealants and coatings can be applied up to 8 hr after primer has been applied.
• After 8 hr, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.

TREMprime VB Primer

Two-Component, Epoxy-Based, Vapor Barrier Primer

TREMprime VB Primer is a two-component, epoxy-based solvent-free vapor barrier primer for concrete surfaces.

Basic Uses

• TREMprime VB is used to mitigate vapor drive caused by moisture in concrete. It can be used on new and existing concrete slabs on grade.

Vulkem Primer #171

Vulkem® Primer #171 is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem® urethane sealants, membranes or coatings will be applied. NOT for use in Canada.

Basic Uses

• Porous surfaces, urethane sealants, Vulkem Coating Systems and TREMproof membranes.
• Quick-drying, one-part, moisture-curing primer.
• It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood.
• Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond. At 70 °F (21˚C), allow 30 to 45 min for primer to become tacky before applying sealant, coating or membrane.
• Do not allow primer to dry completely. Do not apply sealant or coating if primer becomes hard or glossy.
• If it does, clean with a Tremco approved solvent and coat with Vulkem 191 Primer.

Please contact West Pacific Coatings for more information regarding any of the Tremco products. Our sales team in Vancouver Canada can help you find the best floor Coating for your needs. [Click Here]